ONEN CPCD Series Diesel Forklift (5–10 Ton) | Heavy-Duty Counterbalanced Forklift

Product Overview

When your material handling operation demands raw lifting power across medium-to-heavy duty cycles, the ONEN CPCD Series Diesel Forklift stands ready. Spanning a complete capacity range from 5-ton, 6-ton, 7-ton, and 8-ton up to 10-ton models (CPCD50 through CPCD100), this heavy-duty counterbalanced lineup is engineered for fleet operators, procurement specialists, and logistics managers who refuse to compromise on structural integrity or all-terrain performance.

Manufactured by Guangdong ONEN New-resource Equipments Co., Ltd.—a legitimate diesel forklift manufacturer with 30 years of professional production experience—each CPCD unit is built around a reinforced chassis and a high-rigidity triple-stage mast. Whether your application involves container stuffing at port terminals, high-bay racking in distribution centers, or rough-yard handling of timber and steel, these machines deliver the stability, vertical reach, and continuous-shift endurance required by global material handling standards.

Unlike light-duty alternatives that reach their structural limits under peak stress, the CPCD series is purpose-built for high-frequency, heavy-load handling. With internationally recognized certifications including CE, ISO 9001, ISO 14001, ISO 45001, and SGS, plus a China Special Equipment Production License, ONEN diesel forklifts arrive export-ready and configured for seamless regulatory acceptance in your market.

Key Features & Competitive Advantages

1. Heavy-Duty Construction Built for a Long Service Life

The entire vehicle utilizes high-strength structural materials and advanced welding processes specifically selected to withstand the dynamic forces of daily 5-ton to 10-ton operations. The reinforced counterweight layout and optimized wheelbase deliver a low center of gravity, significantly reducing mast sway when transporting uneven loads at full extension. This industrial-grade architecture not only supports large rated capacities across the series but also extends the structural service life—lowering your total cost of ownership even under maximum utilization.

2. High-Rigidity Mast Engineering for Stable High-Altitude Stacking

At the core of every CPCD model is a high-strength steel mast engineered for exceptional rigidity and lateral stability. The three-stage mast system provides standard lift heights of 3,000 mm with generous free-lift clearance, enabling operators to safely access double-deep racking and high-bay storage without compromising door-height maneuverability. Whether lifting 5,000 kg in a warehouse or 10,000 kg in an outdoor yard, the mast maintains minimal deflection, ensuring precise load placement and operator confidence at elevation.

3. Operator-Centric Cab for Reduced Fatigue & Maximum Control

Productivity begins with operator comfort. The CPCD series features an adjustable steering wheel and a spacious seated cabin designed to accommodate operators through extended shifts. Multi-way valve control levers are ergonomically positioned within natural arm reach, delivering intuitive hydraulic control and a brand-new driving experience that minimizes training time and maximizes cycle efficiency. Combined with excellent forward visibility and low noise/vibration powertrain mounting, the cab keeps operators alert, comfortable, and in full command from the first load to the last.

4. Streamlined Industrial Aesthetics with Functional Design

Strength meets modern industrial styling. The vehicle body carries elegant folded-edge lines that run cleanly along the side panels, harmonizing with a large arc-shaped overhead guard frame. The result is a silhouette that is compact, dynamic, and stylish—projecting professional reliability on any job site. Beyond aesthetics, this streamlined profile improves maneuverability in tight warehouse aisles, while the robust roof guard provides certified impact protection without obstructing upward visibility during high-rack operations.

5. Flexible Powertrain Configured for Global Markets

Recognizing that emission standards and fuel policies vary by region, ONEN offers the CPCD series with a choice of proven diesel engines including Xinchai, Quanchai, Yanmar, and ISUZU. These powerplants are matched to either hydraulic or mechanical transmission systems to suit your operational profile—from smooth yard shuttling to aggressive ramp climbing. A high-capacity fuel tank (150L–180L depending on specification) ensures full-shift continuous operation, while travel speeds up to 24 km/h (unladen) keep your logistics loop moving efficiently.

6. All-Terrain Mobility with Configurable Tire Solutions

Adapt your fleet to the surface, not the other way around. Choose deep-tread pneumatic tires for superior shock absorption on rough outdoor terrain, or specify solid rubber tires for puncture-proof reliability in debris-heavy environments. With optimized ground clearance, wide front/rear track dimensions, and tight turning radii engineered across the 5–10 ton range, CPCD forklifts navigate cluttered docks, gravel yards, and uneven hardstand areas with sure-footed confidence. Gradeability of up to 15% ensures controlled performance on slopes and loading ramps.

7. Dual-Brake Safety Architecture

Safety is engineered into every system. Each CPCD model employs a dual-brake configuration: a power service brake (automatic/pedal-operated) for smooth, controlled deceleration under full load, and a mechanical parking brake (manual) for secure stationary holding on inclines. This redundant stopping system provides peace of mind whether descending ramps with a 10-ton capacity load or positioning fragile inventory at height.

Application Scenarios

The versatility of the ONEN CPCD 5–10 ton diesel forklift series makes it an indispensable asset across multiple verticals:

• Port Terminals & Container Yards: Handle container stuffing, de-stuffing, and heavy cargo marshalling with mast stability you can trust.

• Heavy Manufacturing & Assembly Workshops: Feed production lines and move dies, castings, and raw materials with seamless indoor-outdoor transition.

• Distribution & Logistics Centers: Stack and retrieve palletized inventory from high-density racking systems with precision and speed.

• Outdoor Timber, Steel & Building Material Yards: Rely on rugged construction and all-terrain tire options to move uneven, heavy loads across unpaved or rough surfaces.

• Warehouse & Cold Storage: Tight turning circles and pneumatic tire configurations make narrow-aisle and temperature-controlled operations equally efficient.

Why Source from ONEN?

Guangdong ONEN New-resource Equipments Co., Ltd. delivers more than heavy machinery—we deliver a complete material handling partnership backed by three decades of engineering excellence. When you specify ONEN, you benefit from:

• Complete International Certifications: ISO 9001, ISO 14001, ISO 45001, CE, RoHS, and SGS for seamless global importation.

• Licensed Manufacturing: Fully certified with China Special Equipment Production License and TX type-test certificates.

• Award-Winning Innovation: Recognized with the Canton Fair Design Award for excellence in industrial equipment engineering and ergonomics.

• Full Product Ecosystem: Standardize your fleet with one trusted supplier. Beyond diesel forklifts, ONEN manufactures electric forklifts, scissor lifts, reach trucks, pallet stackers, and walkie pallet trucks.

• Factory-Direct Customization: We welcome on-site factory inspections and offer transparent customization of mast heights, tire specifications, engine configurations, and paint schemes to match your local market requirements.

Ready to Upgrade Your Fleet?

Get a factory-direct quotation for the ONEN CPCD Series Diesel Forklift (5–10 Ton) today. Whether you need a single 10T diesel forklift for port operations or a mixed fleet of 5-ton, 7-ton, and 8-ton models for warehouse distribution, our engineering team will configure the ideal specification for your application and regulatory environment.

Contact Guangdong ONEN New-resource Equipments Co., Ltd. now to discuss volume pricing, OEM/ODM partnerships, shipping logistics, and comprehensive after-sales support tailored to your market.