Technical Specifications (CPDD-V-2030)

Mast & Lift Height Options (CPDD-V series)

ONEN 2.0T Full-Electric Counterbalance Forklift, Seated Operator, Lift 3M

(CPDD-V-2030)

Model: CPDD-V-2030
Rated Load: 2,000 kg (4,400 lb)
Max. Lift Height: 3,000 mm (10 ft)
Drive Type: 2WD Seated Operation
Power: 80V / 230Ah Lithium Battery
Tires: Solid or Pneumatic (18×7-10 Front / 16×6-8 Rear)

Product Overview

   Do you need a compact electric forklift that lifts, travels, stacks and loads without diesel fumes or noise? The ONEN CPDD-V-2030 is a 2.0-ton, seated-operator, lithium-battery counterbalance forklift built for warehouses, factory workshops, logistics centers, stations and port terminals. It carries 2,000 kg at a 500 mm load center and lifts to 3 m as standard, with mast options up to 6 m. Powered by an 80 V / 230 Ah lithium battery and a 14 kW AC drive motor, it travels at up to 16 km/h and climbs 22% grades while loaded. The ergonomic seated station and full overhead guard keep operators comfortable through long shifts, and the 2,300 mm turning radius threads narrow rack aisles. Every unit ships export-ready from Guangdong ONEN New-resource Equipments Co., Ltd, backed by 30 years of material-handling experience.

Key Features & Competitive Advantages

1. Zero-Emission 80V Lithium Power

.The CPDD-V-2030 runs on an 80 V / 230 Ah lithium battery paired with a matched 80 V / 100 A fast charger, so it charges quickly and supports opportunity charging over breaks and shift changes — the truck is ready around the clock without ever being taken out of service. There is no heavy battery to swap, no acid to handle, and no ventilated charging room to build, which frees up valuable floor space and removes a common safety headache. Because it produces zero tailpipe emissions, the 2030 is fully safe for enclosed warehouses, food and beverage storage, pharmaceuticals and indoor air-quality-sensitive environments where diesel and LPG trucks are simply not allowed. The lithium pack carries a three-year warranty, and its long cycle life and high charge efficiency keep energy costs and total cost of ownership well below lead-acid alternatives

2. Low-Maintenance AC Drivetrain.

A 14 kW AC drive motor and 18 kW lift motor run brushless, so there are no carbon brushes to inspect or replace and no complex multi-gear transmission to service. That translates into far fewer planned downtime windows and much lower spare-parts spend over the life of the truck. Daily upkeep is reduced to simple visual checks — keeping the wheels clear of debris and the battery charged — while the electromagnetic and reverse braking system is essentially wear-free. For fleet managers running mixed shifts, this means higher availability per unit and a smaller maintenance burden than a comparable engine truck.

3. Strong, Confident Performance

With 16 / 16 km/h travel speed (laden and unladen) and 22% / 25% laden/unladen gradeability, the 2.0T CPDD-V keeps pace with busy operations, moves quickly between zones, and still climbs loaded up dock plates, ramps and gradient approaches with authority. Lifting runs at 350–400 mm/s and lowering at 400–450 mm/s, so stacking and put-away cycles are fast without sacrificing control, and the high-torque hydraulic power unit delivers smooth, jerk-free motion that protects fragile or high-value loads. The result is real throughput: more pallets moved per shift than a walk-behind or economic rider unit, at a fraction of the cost of a large IC forklift.

4. Compact, Maneuverable Body

At just 1,150 mm overall width with a 2,300 mm turning radius and a 2,010 mm lowered mast, the truck threads narrow rack aisles, turns inside tight staging areas and drives straight into standard shipping containers and trailers. A 3,130 mm working aisle for 1000×1200 pallets (2,930 mm for 800×1000) lets you pack racking denser and store more pallets per square meter. Where ceiling or door height is limited, 3-stage mast options add generous free lift — up to 2,000 mm — so the forks extend inside a low-profile mast, and the whole CPDD-V series can be specified with lift heights from 3,000 mm up to 6,000 mm to match your tallest rack.

5. Comfortable, Safe Seated Operation

The ergonomic seated operator station, low step-in height and full overhead guard reduce fatigue and keep the driver protected through long, demanding shifts — a real productivity advantage over stand-on and walk-behind trucks when travel distances are long. Controls are laid out for natural reach so operators stay precise at the rack face, and the choice of standard solid tyres for smooth indoor floors or optional pneumatic tyres for rougher ground lets you tune ride comfort and traction to the actual working surface. Combined with low noise and zero emissions, the 2030 is a truck operators are happy to run all day.

Application Scenarios

Warehouses & Distribution Centers. Zero emissions and sub-noise electric operation make it safe for indoor racking, and the 3,130 mm pallet aisle (1000×1200) keeps stocking and picking fast.

Factory Workshops & Production Lines. Move raw material, WIP and finished goods between stations; 2,000 kg capacity handles standard pallet loads with margin.

Loading Docks & Containers. The 2,500 mm body length and compact mast load and unload trailers and containers efficiently.

Stations & Port Terminals. Pneumatic-tyre option and 22% gradeability suit mixed indoor/outdoor and dock approaches.

Why Source from ONEN?

Guangdong ONEN New-resource Equipments Co., Ltd. has spent three decades refining forklift design and manufacturing. When you partner with ONEN, you gain:

• Complete Certifications: ISO 9001, ISO 14001, ISO 45001, CE, RoHS, and SGS.

• Licensed Manufacturing: China Special Equipment Production License and TX type-test certificates.

• Award-Winning Design: Recognized with the Canton Fair Design Award.

• Full Product Ecosystem: From electric and diesel forklifts to scissor lifts, reach trucks, pallet stackers, and walkie pallet trucks—standardize your entire fleet with one trusted supplier.

Frequently Asked Questions